ISO NX 20 Z complex bearings

Basic Load Rating, Static Rating(N):11300; Surface Treatment:No; Stroke:No; Bearing Unit, Type:Cartridge type unit; Diameter series symbol:Medium Load; Unit, Type:Insert Bearing Unit; Days to Ship:Quote; Fit:J7; Surface Treatment:No; Rolling Element Material:Bearing Steel;

C Chamfered:Not Provided; Days to Ship:10 Days; Bearing Retained:Yes (with retaining; Bearing Part Number:6005; Width T(mm):19; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Shape:T-Shaped; Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea;

Stroke:No; Seal:Nitrile; Unit, Type:Insert Bearing Unit; Bearing Unit, Type:Diamond Flange Shape; Stroke:No; Bearing Inner Dia. Shape:Tapered hole adapter; Diameter series symbol:Used for Light load; d:20; Days to Ship:11 Days; RoHS:6;

Dimension L Fix:3.87 in; Y2 - Geometry Factor:4.17; Dimension J (Bolt Size):0.875 in; Float:0.083 in; Dimension D:7.63 in; Shaft Tolerance:0.0030 in; Dimension E:6.72 in; Grease Lubrication - B/C/O Seal:950 rpm; Engineering Group:Mounted Bearing; Shaft Size  :3-3/16 in;

Min operating temperature, Tmin:-20 °C; B3:9 mm; Bearing with/without cage:Sans; Weight / Kilogram:0.465; Track load capacity spherical outer ring:5.55 kN; Mass:0.46 kg; B1:66 mm; F:25 mm; R:500 mm; Nlim (grease):4,000 rpm;

L1:70 mm; Designation of bearing:US206-19G2; A5:22 mm; Z:52.5 mm; A1:12 mm; S:8 mm; s1:15 mm; C:19.5 kN; H1:89 mm; N1:16 mm;

Stroke:No; Fit:J7; d:60; Unit Body Material:Cast Iron; Stroke:No; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; Fit:J7; Bearing Inner Dia. Shape:Tapered hole adapter; RoHS:6;

Type:Bearings with Housin; Flange O.D. H(φ):47; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Seals:DD (Contact Rubber S; Days to Ship:7 Days; Number of Bearings:Single; Type:Bearings with Housin; Shape:Flange Type; Number of Bearings:Single;

Da - Cup Frontface Backing Diameter:1290.10 mm; Series:776000; Db - Cup Backface Backing Diameter:1260.09 mm; Aa - Cage-Cone Backface Clearance:12.7 mm; e - ISO Factor8:0.57; B:95.250 mm; C0 - Static Radial Rating:1570000 lbf; G2 - Heat Generation Factor (Rib-Roller End):2940; C1 - Dynamic Radial Ra

Unit, Type:Insert Bearing Unit; Stroke:No; Diameter series symbol:Medium Load; Unit, Type:Insert Bearing Unit; RoHS:6; Days to Ship:Quote; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Cylindrical Bore Set;

N:27mm; Recommended tightening torque for set screw:27.1 Nm; A:88 mm; H:101.6 mm; B1:72.5 mm; Weight:14 kg; Designation of bearing:EX218-56G2; N1:33 mm; S:24.5 mm; H2:200 mm;

Recommended tightening torque for set screw:8 Nm; L1:90 mm; C:31.85 kN; C0:20.8 kN; B:41.2 mm; A2:53 mm; s1:20.6 mm; Designation of bearing:US209-26G2T20; H:181 mm; Designation of housing:FA209-;

H:31.8 mm; L:126.5 mm; T min.:-40 °C; J:94.5 mm; A:32 mm; N1:17 mm; Recommended tightening torque for set screw:3.7 Nm; T max.:100 °C; C0:6.65 kN; Weight:0.6 kg;

Precision class:P0; d:12 mm; Radial clearance class:CN; Nlim (grease):15,000 rpm; C0r:14.9 kN; Max operating temperature, Tmax:120 °C; Characteristic rolling element frequency, BSF:7.26 Hz; Characteristic outer ring frequency, BPF0:6.05 Hz; F:16 mm; Cr:12.2 kN;

A2:53.3 mm; B:38.1 mm; T max.:100 °C; T min.:-20 °C; B1:51.6 mm; A1:16 mm; e:20 mm; N:23mm; C:33.5 kN; Weight:1.8 kg;